Overveiw            Why Repair?            Services            Products            Warranties

Contact Us

CSI IS YOUR TRUSTED COMPANY!

For additional details and for pricing call us today.
Contact Us

Bonding Agents

CSI OCTOBLEN: Acrylic latex bonding admixture for Portland cement base mixtures, scratch/brown coats, concrete patches, cement paints, slurry and finish coats.

CSI OCTOWELD: Liquid vinyl acetate polymer used as an easy spreading bonding agent for plasters and mortars.

Coatings – Decorative

CSI IPALASTIC: 100% Acrylic elastomeric coating for concrete or stucco.

CSI IPATOP COAT: Two-component polymer modified cementitious coating. Weatherproof coating for concrete or masonry.

Epoxies

CSI IPANOL ANCHOR GEL: A general purpose, non-sag, injectable anchoring gel

CSI IPANOL C: A 3 component water based, solvent free, non-flammable , breathable VOC complaint, epoxy modified–cementitious bonding agent and corrosion inhibitor.

CSI IPANOL DECK SEAL: 100% solids, two component low modulus of elasticity epoxy. Surface barrier for concrete decks in traffic bearing conditions.

CSI IPANOL EPOXY SEALER: a two component, moisture insensitive, self-priming, high gloss epoxy sealer.

CSI IPANOL E-FLEX: 100% solids, two component low modulus of elasticity epoxy. Surface barrier for concrete decks in traffic bearing conditions.

CSI IPANOL E-FLEX RM: a 100% solids, three component, multi-purpose, high strength, flexible, non-shrink epoxy repair mortar.

CSI IPANOL HI-MOD: 100% solids, two component high modulus of elasticity epoxy for structural repairs. AASHTO M235-91, ASTM C881, Type 1, II, IV & V, Grade 2, Class B & C.

CSI IPANOL LV: 100% solids, two component moisture insensitive low viscosity epoxy. AASHTO M235-91, ASTM C881, Type 1 & IV, Grade 1, Class B & C.

Grout

CSI IPATOP PENNGROUT: Versatile high strength non-shrink grout for dry-pack, plastic, pumpable and pourable applications.

Grout – Hydrolic

CSI IPATHANE HYDROLIC GROU: V.O.C. compliant, nonflammable polyurethane injection resin formulated to seal dynamic non-structural cracks in concrete and prevent water migration..

Mortars – Patching

CSI DRYCON SM/SMF: Waterproof structural repair mortar for pneumatic spray gun installation.

CSI IPATOP HES: One-component cementitious shrinkage compensated repair mortar for High, Early Strength applications.

CSI IPATOP HF: One-component cementitious shrinkage compensated, flowable repair mortar for pour and pump applications.

CSI IPATOP RM: Pre-mixed, one-component, cementitious repair mortar for horizontal applications.

CSI IPATOP VO: Two-component repair mortar for vertical and overhead repair of concrete structures.

CSI IPATOP SHOTCRETE: One-component micro silica enhanced material for overhead, vertical, and horizontal concrete repairs covering large areas. Formulated for pneumatic application using dry process shotcrete equipment.

CSI OCTOCRETE: Single-component, polymer modified repair mortar available in 15 minute and 30 minute set times.

CSI OCTOCRETE U: Single-component, polymer modified repair mortar for underwater use.

CSI OCTOSKIM: Two-component kit for resurfacing horizontal concrete – minor spalling and surface uneveness.

Hydrolic Waterstops

CSI IPANEX-R: Two-coat, cementitious kit used to prevent seepage of water through masonry and concrete.

CSI OCTOPLUG PLUS: A single component, expanding, polymer modified hydraulic cement based water-stop mortar. Designed to stop running water and seeping water through cracks in concrete and masonry.

Sealants

SoudaSeal AP: All purpose construction sealant

SoudaSeal SL: Self leveling sealant

SoudaSeal 50ML: Low modulus high movement joint sealant

SoudaSeal 150ML: Ultra low modulus, high movement joint sealant

Sealers

CSI IPASEAL 50W: VOC compliant, water based, silane/siloxane deep penetrating water repellent for concrete and masonry surfaces.

CSI IPANOL Deck Seal: a 100% solids, low modulus, low viscosity highly penetrating, epoxy polymer.

Stucco

CSI QUAKER STUCCO: Quaker Stucco is a factory precision blend of Portland cement (ASTM C150) silica sand, hydrated lime (ASTM C206), oxide pigments (ASTM D50) and additives for shrinkage control and color uniformity.

CSI QUAKER WATERPROOFING STUCCO:Quaker Waterproofing Additive is designed to waterproof stucco, improve freeze/thaw durability and protect finishes from efflorescence.

Surface Treatment

CSI DURIPAL: Clear, odorless, inorganic polymer for hardening and stabilizing cementitious building materials.

CSI Enviro-Form Release: Economical, biodegradable forn release

Waterproof – Negative Side

CSI DRYCON: Two-coat, cementitious kit used to prevent seepage of water through masonry and concrete.

CSI DRYCON SM/SMF: Waterproof structural repair mortar for pneumatic spray gun installation.

Waterproof – Positive Side

CSI FARBERTITE: A unique, water-based, coal tar coating that provides exceptional adhesion, flexibility and corrosion protection for concrete, wood or steel construction components that may be exposed to aggressive environments, particularly in marine applications.

CSI IPANEX-R: A liquid admixture which when mixed with portland cement becomes an extremely rapid setting plastic material used to stop pressure leaks in concrete and masonry structures.

CSI OCTOPLUG PLUS: single component, expanding, polymer modified hydraulic cement based water-stop mortar.

CSI Quaker Waterproofing Additive:Additive for waterproofing stucco coatings.